Networked Audio
Radial Engineering Catapult Mini TX 4-Channel Cat 5 Audio Snake
Transmit: four analog audio channels over a single shielded CAT 5 cable
Not shipping to UNITED STATES OF AMERICA
Key Features: - Sends Analog Audio over Cat 5/6 Cable
- Four Female XLR Inputs
- RJ45 Output
- 7 Hz to 20 kHz Frequency Response
Radial Engineering Catapult Mini RX 4-Channel Cat 5 Audio Snake
Receive: four analog audio channels over a single shielded CAT 5 cable
Not shipping to UNITED STATES OF AMERICA
Key Features: - Receives Analog Audio over Cat 5/6 Cable
- RJ45 Input
- Four Male XLR Ouputs
- 7 Hz to 20 kHz Frequency Response
Radial Engineering SGI - Studio Guitar Interface w/ TX, RX Modules
Studio/Stage Guitar Interface System
Not shipping to UNITED STATES OF AMERICA
Key Features: - Balanced line driver for guitar and bass
- Send signal over 100 meters (300ft) without loss
- 100% discrete class-A circuit with Drag control
- Delivers natural tone to off-stage amplifiers
Klark Teknik DN 30R 2-Channel Dante Audio Receiver
Not shipping to UNITED STATES OF AMERICA
Key Features: - 2-Channel audio receiver for connecting active loudspeakers, amplifiers or mixers to Dante-networks
- Automatically reconnects with any configured Dante transmitter such as Klark Teknik DN 30T
- Plug'n'play experience in networked audio
- Perfect for hospitality and event spaces, performance and installed audio, etc.
- 96 kHz D/A conversion and high headroom design offers superior sound quality
- Built-in headphone amplifier for local monitoring
- Aluminium extrusion casing with protective rubber corners
- Floor and wall mount brackets for fixed installation (included)
- Quality Neutrik XLR connectors for highest reliability
- Compact and rugged design
- 1-Year Warranty Program
- Designed and engineered in the U.K.
Klark Teknik DN 30T 2-Channel Dante Audio Transmitter
Not shipping to UNITED STATES OF AMERICA
Key Features: - 2-Channel audio transmitter for connecting mic/instrument and line level sources to Dante-networks
- Automatically reconnects with any configured Dante receiver such as Klark Teknik DN 30R
- Plug'n'play experience in networked audio
- Perfect for hospitality and event spaces, performance and installed audio, etc.
- 96 kHz A/D conversion and high headroom design offers superior sound quality
- Aluminium extrusion casing with protective rubber corners
- Floor and wall mount brackets for fixed installation (included)
- Quality connectors for reliability
- Compact and rugged design
- 1-Year Warranty Program
- Designed and engineered in the U.K.
Cloud DCM1e Digital 8-Zone Matrix Mixer with Ethernet Port/Web Control
Cloud DCM-1e - 8-Zone Digitally Controlled Mixer
Not shipping to UNITED STATES OF AMERICA
Key Features: - Ethernet version of the popular DCM1 Digital Control Zone Mixer
- Can be connected via an to an independent or existing wireless router
- Can be configured and controlled remotely by any mobile device
- Limited installer defined controls via 4 simple and intuitive interface pages
- Configuration Options available which are password protected
Klark Teknik DM8000 Advanced Digital Audio Processor
Not shipping to UNITED STATES OF AMERICA
Key Features: - Configurable DSP
- IP-Based Audio Networking
- Acoustic Echo Cancellation (AEC)
- Auto Mixer Functionality
- 10 Analogue Universal Mic/Line Inputs
- Six Balanced Line Level Outputs
- USB Audio Connection
- Ethernet and RS-232 Ports
Audinate Dante AVIO ADP-DAO-AU-0X1 1-Channel Analog Output Adapter
802.3af-compliant PoE injector device required for use.
Not shipping to UNITED STATES OF AMERICA
Key Features: - Cost-effective solution for adapting analogue gear to your Dante network
- Plug-and-play operation
- Balanced, line-level single-channel analogue output adapter
- Compact and built for the road with sonically welded polycarbonate enclosure
- Sample rates up to 96 kHz
- Wide dynamic range
- High signal-to-noise ratio
- Low total harmonic distortion
- Configurable gain and attenuation
- Dante Audio over IP and AES67 RTP transport formats
- Power over Ethernet (PoE) support
- Compatible with Dante Domain Manager (DDM)
Audinate Dante AVIO 2x2 ADP-AES3-AU-2X2 AES3/EBU I/O Adapter
802.3af-compliant PoE injector device required for use.
Not shipping to UNITED STATES OF AMERICA
Key Features: - Impedance: 110 Ohm balanced
- Signal to Noise Ration: > 135dB
- Asynchronous Sample Rate Conversion support
- Sample Rates: 44.1, 48, 96 kHz
- Bit Depth: 24
- Powered through Class 1 802.3af PoE Switch or injector
Audinate Dante AVIO ADP-USB-AU-2X2 2x2 USB I/O Adapter
Use this over a USB audio interface
Not shipping to UNITED STATES OF AMERICA
Key Features: - Powered through Class 1 802.3af PoE Switch or injector or USB
- Uses USB type A connector (Can use USB-on-the-Go compliant adapter for mobile devices)
- Supports 48kHz sample rate
- Class-compliant audio device does not require drivers for Windows, Mac, iOS or Android devices (versions 6 or higher)
Audinate Dante AVIO ADP-DAI-AU-1X0 1-Channel Analog Input Adapter
802.3af-compliant PoE injector device required for use.
Not shipping to UNITED STATES OF AMERICA
Key Features: - One channel balanced line level analog input
- Adjustable signal levels: +24dBu / +4dBu / 0dBu/ 0dBV /-10dBV (through Dante Controller)
- Frequency Response: 20Hz to 20kHz (-/+0.5dB)
- Impedance: 20k Ohm balanced, 10k Ohm unbalanced
- Dynamic Range > 100dB
- Signal to Noise Ratio: > 100dB
- Total Harmonic Distortion: 0.01% at +4dBu
- Sample Rates: 44.1, 48, 96 kHz
- Bit Depth: 24
- Powered through Class 1 802.3af PoE Switch or injector
Audinate Dante AVIO ADP-DAI-AU-2X0 2-Channel Analog Input Adapter
802.3af-compliant PoE injector device required for use.
Not shipping to UNITED STATES OF AMERICA
Key Features: - Two channels balanced line level analog input
- Adjustable signal levels: +24dBu / +4dBu / 0dBu/ 0dBV /-10dBV (through Dante Controller)
- Frequency Response: 20Hz to 20kHz (-/+0.5dB)
- Impedance: 20k Ohm balanced, 10k Ohm unbalanced
- Dynamic Range > 100dB
- Signal to Noise Ratio: > 100dB
- Total Harmonic Distortion: 0.01% at +4dBu
- Sample Rates: 44.1, 48, 96 kHz
- Bit Depth: 24
- Powered through Class 1 802.3af PoE Switch or injector
Prices do not include taxes.
