Stage Rigging

Doughty T57207 Hanging Clamp with Heavy Duty Ring
Typically ships same or next business day
Key Features: - With M12 heavy-duty ring eyelet
- For tube diameter 48 - 51 mm
- Safe Working Load (SF=5): 500 kg
S$ 64.84
(S$ 64.84 excl GST)
(S$ 64.84 excl GST)
Doughty T57315 Boom Arm 50cm
only 4 units left!
Key Features: - A Boom Arm consists of a 48mm aluminium tube with a factory-fitted weld coupler.
- Length: 500 mm
- Weight: 1.40 kg
- Load bearing capacity: 50 kg
S$ 93.68
(S$ 93.68 excl GST)
(S$ 93.68 excl GST)
Doughty T57320 Boom Arm 100cm
Boom arm with clamp for 48-51mm pipe/truss
Typically ships same or next business day
Key Features: - A Boom Arm consists of a 48mm aluminium tube with a factory fitted weld coupler.
- Polished, with a half coupler for 50 mm tubes
- Length: 1000 mm
- Max. load bearing capacity: 25 kg
Doughty Engineering UK G1155 Double Socket Knuckle Joint
Out of stock
Key Features: - With 16 mm (5/8") HEX spigot
- Suitable for Supaclamp (Article Nr. 105587) and 1/4" thread (UNC)
- Includes adapter from 1/4" to 3/8"
Doughty Engineering G1150 Pivot Arm with Super Clamp and Magic Arm Kit
only 2 units left!
Key Features: - 360 Rotating elbow with toothed joint.
- 360 Rotating ball joint ends with 16mm studs
- Studs tapped for ¼"-20 UNC
- One lever locks all pivot
S$ 190.36
(S$ 190.36 excl GST)
(S$ 190.36 excl GST)
Doughty Engineering UK G1160 Supaclamp Silver Super Clamp
only 2 units left!
Key Features: - The Supaclamp will clamp onto round poles up to 50mm and flat surfaces up to 35mm thick.
- Doughty Engineering manufacture a range of accessories and spigots that snap into the supaclamp to hold lights etc.
- These accessories can be quickly released by pressing the quick release knob on the side of the clamp, a thumb screw secures the spigot once fitted.
S$ 32.84
(S$ 32.84 excl GST)
(S$ 32.84 excl GST)
Doughty Engineering UK G1160 Supaclamp Black Super Clamp
only few units left!
Key Features: - The Supaclamp will clamp onto round poles up to 50mm and flat surfaces up to 35mm thick.
- Doughty Engineering manufacture a range of accessories and spigots that snap into the supaclamp to hold lights etc.
- These accessories can be quickly released by pressing the quick release knob on the side of the clamp, a thumb screw secures the spigot once fitted.
S$ 36.04
(S$ 36.04 excl GST)
(S$ 36.04 excl GST)
Doughty T58410 Fifty Clamp Black
Typically ships same or next business day
Key Features: - A pressure die cast clamp.
- Compatible working height with the Quick Trigger Clamp range.
- Fully TUV Approved
S$ 32.64
(S$ 32.64 excl GST)
(S$ 32.64 excl GST)
Doughty T57000 Standard Doughty Coupler Polished
Out of stock
Key Features: - The Doughty Clamp Half Coupler is the Basis of the range of Doughty Clamps.
- This Clamp has a slotted base to captivate a M12 Nut or Bolt enabling users to create fixings suited to their own individual requirements.
- Manufactured from high tensile Aluminium Extrusion.
Doughty T58122 Super Lightweight Half Coupler Polished
Typically ships same or next business day
Key Features: - The Super Lightweight Doughty Clamp Half Coupler is the Basis of the range of Super Lightweight Doughty Clamps.
- This Clamp has a slotted base to captivate an M10 Nut or Bolt enabling users to create fixings suited to their own individual requirements.
- Manufactured from high tensile Aluminium Extrusion.
S$ 24.24
(S$ 24.24 excl GST)
(S$ 24.24 excl GST)
Doughty T5812201 Super Lightweight Half Coupler Black
Typically ships same or next business day
Key Features: - The Super Lightweight Doughty Clamp Half Coupler is the Basis of the range of Super Lightweight Doughty Clamps.
- This Clamp has a slotted base to captivate an M10 Nut or Bolt enabling users to create fixings suited to their own individual requirements.
- Manufactured from high tensile Aluminium Extrusion.
S$ 30.40
(S$ 30.40 excl GST)
(S$ 30.40 excl GST)
Doughty T57001 ST Slimline Coupler
only few units left!
Key Features: - The Slimline Doughty Clamp Half Coupler is the Basis of the range of Slimline Doughty Clamps.
- This Clamp has a slotted base to captivate an M12 Nut or Bolt enabling users to create fixings suited to their own individual requirements.
- Manufactured from high tensile Aluminium Extrusion.
S$ 37.84
(S$ 37.84 excl GST)
(S$ 37.84 excl GST)
For export (= shipments outside of Singapore) we do not charge GST. In this case, please refer to the prices excl GST.