Loudspeaker Management

Behringer ULTRADRIVE PRO DCX2496 Ultra-High Precision Digital 24-Bit/96 kHz Loudspeaker Management System

• 3 analog inputs (one suitable as digital stereo AES/EBU input) and 6 analog outputs for maximum flexibility
• High-end 96 kHz converters for ultimate signal integrity and wide dynamic range (120 dB)
• Integrated sample rate converter for easy connection of external digital signals with sampling rates from 32 to 96 kHz
• Precise Dynamic EQs for level-dependent equalization and extremely musical Parametric EQs, selectable for all inputs and outputs
• Several types of EQs (LP/BP/HP) for each input and output
• "Zero"-attack Limiters on all output channels for optimal speaker protection
• Four different mono and stereo output operating modes
• Individual crossover filter types (Butterworth, Bessel and Linkwitz-Riley) with selectable roll-off characteristics from 6 to 48 dB/octave
• Adjustable Delays for all inputs and outputs—allow manual or automatic correction for room temperature, phase and arrival time differences
• Additional Sum signal derived from the A/B/C inputs offers a fourth internal input signal
• Free ULTRADRIVE PRO software enables total control via PC through RS-232 and RS-485 interfaces
• Link option via RS-485 network interface enables cascading of several ULTRADRIVE PROs
• 60 user-defined internal presets storable
• Servo-balanced, gold-plated XLR connectors for all inputs and outputs
• Internal switch-mode power supply for maximum flexibility (100
• - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
• 1-Year Warranty Program
• Designed and engineered in Germany

Bose Professional ControlSpace SP24 Sound Processor

• Real-time control and the ability to program and store custom scenes with the easy-to-use SP-24 Editor software
• SP-24 Editor software provides complete access to all signal processing functions including custom channel routing, input and output 9-band dual equalization, band pass filters, delays, peak limiter, and gain and signal polarity for full system control
• Simplified front panel LCD menus and controls are purposely designed to make it easier to select pre-programmed scenes, gain and delay parameters, or quickly access Bose loudspeaker presets
• USB port enables plug-and-play PC access for system configuration, programming, signal level monitoring, and firmware updates using the SP-24 Editor software
• Extensive Bose professional loudspeaker library enables quick access to factory-created equalization curves while the SP-24 Editor software provides intuitive graphical tools for optimizing any passive or powered loudspeaker
• Two XLR inputs and 4 outputs for balanced connectivity to professional audio gear
• Signal and clip LED indicators show the signal status of the input channels
• Front panel lockout feature prevents unauthorized use
• Designed for a wide range of applications such as auditoriums, houses of worship, live music performances, restaurants and bars, retail stores, and auxiliary zones
• Complies with CE requirements and is cUL listed according to UL60065 (7th edition) and CAN/CSA C22.2 No. 60065-03, CB approved according to IEC60065 (7th edition) including group and national differences, and is PSE compliant
• Complies with FCC Part 15B Class A (2003), EN55103-1 (1997), EN55103-2 (1996), CISPR13 (2003), and Canadian ICES-003 Class A specifications

Lake LM44 Audio System Processor

• High-performance LAKE digital audio system processor for unparalleled loudspeaker management and system control
• Raised Cosine Equalization plus linear phase and classic crossovers for ultimate sound-shaping abilities
• Configurable LAKE groups offers simultaneous non-destructive parameter adjustments across all LAKE platforms
• Redundant audio inputs and on-board system surveillance for full system security
• Full system control via LAKE Controller touch-screen-optimized software application
• LimiterMax Peak and RMS limiters offer seamless power output control
• 4 x LAKE Mesa modules or 2 x LAKE Contour modules for optimized system or loudspeaker control
• 4 x analog inputs and 4 x analog outputs with Iso-Float ground isolation provided through Neutrik XLR connectors
• 4 x AES3 digital audio inputs and 4 x AES3 digital audio outputs with up to 192 kHz sampling frequency provided through Neutrik XLR connectors
• 2 x Neutrik etherCON RJ-45 ports provide dual redundant Dante interfaces and remote configuration via LAKE Controller and Dante Controller software
• High-quality A/D and D/A 24-bit conversion and 96 kHz internal sampling frequency
• Front panel accessible Dedicated Module Input and Output Mute buttons and LED metering
• Rugged 1U rackmount chassis for space saving durability in touring applications
• 100 user presets for simple and efficient system configuration and set-up
• Backlit, white-on-black front panel daylight readable display
• Dynamic buttons and rotary encoder for front panel parameter adjustment
• Software configurable GPIO for 3rd party system control
• Universal 70 - 265 V power supply served through a locking IEC mains connector
• 1-Year Warranty Program
• Designed and engineered in Sweden

Lake LM26 Audio System Processor

• High-performance LAKE digital audio loudspeaker processor for unparalleled loudspeaker management and system control
• Raised Cosine Equalization plus linear phase and classic crossovers for ultimate sound-shaping abilities
• Configurable LAKE groups offers simultaneous non-destructive parameter adjustments across all LAKE platforms
• Redundant audio inputs and on-board system surveillance for full system security
• Full system control via LAKE Controller touch-screen-optimized software application
• LimiterMax Peak and RMS limiters offer seamless power output control
• 4 x LAKE Mesa modules or 2 x LAKE Contour modules for optimized system or loudspeaker control
• 2 x analog inputs and 6 x analog outputs with Iso-Float ground isolation provided through Neutrik XLR connectors
• 4 x AES3 digital audio inputs and 4 x AES3 digital audio outputs with up to 192 kHz sampling frequency provided through Neutrik XLR connectors
• 2 x Neutrik etherCON RJ-45 ports provide dual redundant Dante interfaces and remote configuration via LAKE Controller and Dante Controller software
• High-quality A/D and D/A 24-bit conversion and 96 kHz internal sampling frequency
• Front panel accessible Dedicated Module Input and Output Mute buttons and LED metering
• Rugged 1U rackmount chassis for space saving durability in touring applications
• 100 user presets for simple and efficient system configuration and set-up
• Backlit, white-on-black front panel daylight readable display
• Dynamic buttons and rotary encoder for front panel parameter adjustment
• Software configurable GPIO for 3rd party system control
• Universal 70 - 265 V power supply served through a locking IEC mains connector
• 1-Year Warranty Program
• Designed and engineered in Sweden

Mackie SP260 2 x 6 Loudspeaker System Processor