Radial Engineering

A longstanding reputation for bringing reliable and tough-as-nails problem solvers to the market, Radial Engineering products include the world's finest direct boxes, splitters and audio interfacing devices, which have graced the stages and studios of many of music's biggest acts including Rush, U2, Bruce Springsteen, AC/DC, Billy Joel, Paul McCartney, among many others.
Radial products are also regularly chosen by audio/video integrators for use in non-music applications but where pristine audio is required.
AVLFX / Loud Technologies Asia is the official Radial Engineering exclusive distributor and authorised service centre for Singapore and South East Asia.
Radial Engineering Reamp Station Studio Reamper and Direct Box
- Active DI Box and Passive Reamper
- Custom-Wound Transformer, Made in the USA
- 1/4", 3.5mm, and Balanced XLR Inputs
- 1/4" and XLR Outputs
- 1/4" Link In and Out for Multiple Amps
- Mute, Pad & Three-Way Output Filter
- Class-A Buffer for Long Cable Runs
- Ground-Lift and Phase Reversal Switches
- DI Circuit Runs Off 48V Phantom Power
- 14-Gauge Steel Construction
(S$ 719.99 excl GST)
Radial Engineering Reamp HP Compact Reamper
- Play prerecorded tracks through amps and pedals
- Easily Reamp from any interface or playback device
- 1/4″ and 3.5mm inputs connect to a headphone output jack
- Transformer isolated for low-noise recordings
(S$ 149.99 excl GST)
Radial Engineering Tonebone Twin-City Active ABY Switcher
- ABY Switcher for Two Amplifiers
- Switch Between Amps or Play Both at Once
- 1 x 1/4" Input, 2 x 1/4" Outputs
- Buffered Class-A Circuitry
- Drag Control for Amp-Impedance Emulation
- Ground Lift Switch
- 180° Polarity Inversion Switch
- Channel Switcher for Certain Amps
- Can be Routed with Tuners
- 14-Gauge Steel Construction
- Drag Control load correction for natural tone
- Active ABY amp switcher & Class-A buffer
- Isolated output eliminates hum and buzz
Radial Engineering BigShot i/o True-Bypass Instrument Selector with LEDs
- Dim Switch, Bright Switch
- Input Connectors: ¼" jack for first instrument connection Input-2, ¼" jack with dim and bright controls
- Output Connectors: ¼" jack is switchable between always-on, or engaged by Mute switch
- Extras: Tuner/toggle switch
(S$ 188.49 excl GST)
Radial Engineering Tonebone Bassbone V2 Bass Preamp and DI Box
- 2-Channel Bass Preamp
- Drive 2 Basses to Amp or PA
- EQ & Volume Control Per Channel
- Switchable Effects Loop
Radial Engineering Tonebone PZ-Pre Acoustic Instrument Preamp
- 180° polarity reverse, Ground lift, Effects Loop, EQ Control, Boost
- Input Connectors: 1/4"
- Output Connectors: Pre and Post EQ XLR
- Extras: 1/4" Effects Loop, Tuner
Radial Engineering PZ-Pro Acoustic Instrument Preamp, DI, and Switcher
- 180° polarity reverse, Ground lift, Effects Loop, EQ Control, Boost
- Input Connectors: 1/4" instrument, XLR microphone
- Output Connectors: Pre and Post EQ XLR, 1/4" Amp out
- Extras: 1/4" Effects Loop, Boost, Tuner
(S$ 927.99 excl GST)
Radial Engineering PZ-Deluxe Acoustic Preamp
- Acoustic preamp for all types of pickups and transducers
- Low-cut filter and 180° polarity reverse to eliminate feedback
- Radial direct box output to feed the PA
- Power booster and mute for more control on stage
Radial Engineering DRAGSTER Guitar Pickup Impedance Load Correction Device
- Adjusts the load on magnetic pickup for a natural sound
- Warms up the tone of harsh sounding active buffers
- Helps improve the sound of your wireless system
- Compact and lightweight, can be used anywhere!
Radial Engineering BigShot ABY True-Bypass Amplifier Switcher with Tuner Out
- 180° polarity reverse, Ground lift
- Input Connectors: 1/4"
- Output Connectors: Two 1/4" outputs, switchable transformer isolated from Output-B
- Extras: Tuner Output, ISO switch
Radial Engineering Bassbone OD 2-Channel Bass Preamp
- 180° polarity reverse, Ground lift, HPF, Drag Control, Level Control, Phase Adjustment, Effects Loop, EQ Control, Boost
- Input Connectors: 1/4"
- Output Connectors: 1/4", XLR, 3.5mm
Radial Engineering Tonebone AC Driver Acoustic Instrument Preamp
- Input – ¼” jack used to connect your instrument to the AC-Driver.
- Level – Controls the output level of both the XLR and the ¼” outputs.
- Notch – Sets the center frequency for the notch filter. Used to eliminate feedback.
- Notch Q – 3-position switch bypasses the notch filter or selects between a normal or extra-deep notch. Works in conjunction with the notch frequency control.
- 180°Phase Reverse – Used to reduce on-stage feedback by reversing the polarity of the XLR output.
- Low Cut – Variable filter rolls off excessive low frequencies and controls bass resonance.
- Output – ¼” post-eq output used to feed an on-stage amplifier.
- Mute Switch and LED – Footswitch turns off all outputs except the tuner out. Used for quiet on-stage tuning.
For export (= shipments outside of Singapore) we do not charge GST. In this case, please refer to the prices excl GST.