Superior Digital Performance
The QT-AD10 Digital PlayerMic and Digital PlayerMic S bodypack transmitters have been developed in collaboration with Shure Corporation to work exclusively with Shure Axient Digital receivers, ensuring superior digital transmission with advanced encryption and spectrum efficiency.Remote Control Audio System
The QT-AD10 Digital PlayerMic utilizes the RCAS™ (Remote Control Audio System) a revolutionary way to remotely control transmitter settings from a central computer or hand held remote control. The remote functions allow technicians to control; on/off, monitor status and battery level and make on-the-fly adjustments of frequency, mic offset, mic mute, RF power level, and grouping, all wirelessly.Four UHF Tuning Blocks
The QT-AD10 Digital PlayerMic is offered in 4 tuning blocks that span 470 to 700 MHz and 941 to 960 MHz in 25 kHz steps.Comfortable and Concealable
The QT-AD10 Digital PlayerMic has a flexible polymer case to create the safety and ruggedness required for professional sports. The Digital PlayerMic has a run time of 8 hrs at 10mW, while the shorter Digital PlayerMic S has a run time of 4 hours at 10mW. Weighing only 2 ounces and less than a 1/2 inch thick, the Digital PlayerMic joins the Q5X family as the safest and most comfortable audio transmitter in the industry.All Analog transmitters have 2 Q5X Modes. Choose an additional Mode for Lectro UCR/SRc, Shure UR or Sennheiser HiDyn plus receiver compatibility.
Note:
For legal use in Singapore, transmitters will be restricted to 10mW for legal use according to IMDA guidelines. Export versions will be capable of full transmission power and will be marked "FOR EXPORT" on the packaging.Please indicate your receiver frequency block in the comments when ordering.
Dimensions: 93.5mm x 41.5mm x 11.5mm (PlayerMic)
Weight: including battery, 60.7 g (PlayerMic)
Housing Material: Polymer Case
Encryption: AES 256 Encryption
RF output power: 2mW, 10mW, 20mW (user selectable, country restrictions apply)
UHF frequency range 470 to 700 MHz and 941 to 960 MHz in 4 frequency blocks
Tunable bandwith: Varies by frequency block (25 kHz steps)
Modulation type : Shure Axient Digital Proprietary
Mic offset gain range: -12 to 21 dB (in 1 dB steps)
Pre-amplifier Equivalent Input Noise (EIN), System gain setting ≥ +20: -115 dBV, A-weighted, typical
Maximum input level: 1 kHz at 1% THD, 3 dBV (5.0V)
Input impedance: 8.2K with 5V Mic Bias
Frequency response: 20 Hz to 20 KHz
NOTE: system frequency response is dependent on the microphone element
Audio connector: 1 pin Lemo
Occupied bandwidth: 200 kHz
Channel-to-Channel spacing
Standard Mode – 350 KHz
High Density Mode – 125 KHz
Antenna: 1/4 wave UHF and 2.4 GHz
Antenna impedance: 50 Ohm
Battery: Internal Lithium Polymer
Operating time: (Battery) estimated 8 hrs @ 10mW (PlayerMic)
Operating temperatures: -20⁰C to 50⁰C
Storage temperatures: -20⁰C to 45⁰C
Approvals: FCC, CE, Industry Canada
For export (= shipments outside of Singapore) we do not charge GST. In this case, please refer to the prices excl GST.