Big sound. Full sound. Sophisticated sound. Is your mic living up to the power of your vocal? For decades, the BETA® 58A has been through the ringer, pushing voice to the forefront on the biggest stages in the world. For sound that commands the attention of the entire crowd, this is your microphone.
HOW IT WORKS
On stage or in the studio, the BETA 58A is made for refined voice. The brightened midrange and bass roll-off give lead and background vocals a mighty presence in the mix. And the supercardioid pattern works harder to isolate your sound from every other source in the air. You could say it’s a singer’s best friend.WHY IT’S BETTER
No worse for wear
The hardened steel mesh grille stands up to some of the roughest sweat drips, mic drops and van rides, without so much as a dent to show for it.Out-louds the noise
The neodymium magnet provides higher output levels, so your sound is clear - and everything else stays in the background.A worldwide star
The BETA 58A is a top-selling, single-element, dynamic microphone, and can be seen every night on stages all around the globe.In the Box
Shure Beta 58A Handheld Supercardioid Dynamic Microphone
Microphone Clip
5/8 to 3/8" Threaded Adapter
Zippered Storage BagNot in the Box
XLR Microphone Cable (Not Included)
Microphone Stand (Not Included)Type
Electret CondenserFrequency Response
50 to 20,000 HzPolar Pattern
SupercardioidOutput Impedance
EIA rated at150 Ω(100 Ωactual)Sensitivity
at 1kHz,open circuit voltage-52.5 dBV/Pa(2 mV)[1]
Maximum SPL
1 kHz at 1% THD,1 kΩ load140.5 dB
Signal-to-Noise Ratio
Ref. 94 dB SPL at 1 kHz70.5 dB[2]
Dynamic Range
at 1kHz,1 kΩ load117 dB
Clipping Level
1 kHz at 0.25% THD,1 kΩ load-6 dBV (0.5 V)
Self Noise
typical,equivalent SPL, A-weighted23.5 dB
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3Weight
Net0.207 kg(0.475 lbs)
Connector
Three-pin professional audio (XLR), male, balancedHousing
Aluminium construction with a painted blue metallic finish, and hardened steel grille with nickel satin chrome platingPower Requirements
11 to 52 V DCphantom power (1.2 mA)[1] 1 Pa=94 dB SPL
[2] S/N ratio is difference between 94 dB SPL and equivalent SPL of self noise, A-weighted
You may also like:
For export (= shipments outside of Singapore) we do not charge GST. In this case, please refer to the prices excl GST.
