sE8 (Pair) | Buy sE Electronics direct from Singapore's Authorized Dealer for warranty assurance.
Designed for stereo recording, the sE Electronics sE8 Matched Pair gives you two sE8 microphones in one convenient package. The sE8 itself is is a small-diaphragm condenser microphone with a hand-made, gold-sputtered cardioid capsule. Suitable for live and recording scenarios, the microphone has been engineered to provide a balanced, transparent, and natural sound, as well as a detailed transient response. With two microphones matched specifically for consistency, you'll be able to capture a clear and accurate stereo image.
The sE8 boasts inherently low self-noise for capturing audio in particularly quiet situations. It also sports an SPL high enough to handle drums, and a dynamic range large enough to handle record triple-piano to triple-forte velocities accurately.
Two switchable pre-attenuation pads are on hand, should you encounter particularly loud sound sources; one will shave off 10 dB, while the other will attenuate 20 dB. You'll also note a switchable low-pass filter that rolls off low end at either 80 Hz or 160 Hz at 6 dB per octave.
To enhance durability—and to reject electrical interference and noise—the sE8 sports an all-metal chassis. The gold-plated, 3-pin XLR connector ensures signal reliability for a long time to come. Handcrafted and hand-tuned, the microphones come with two mic clips, two thread adapters, two windscreens, a stereo bar for mounting the microphones, and a robust metal case for protecting the mics when they're not in use.
FEATURES:
3-micron, gold-sputtered diaphragm
Handcrafted, hand-tuned capsule
Precision electrode design for a linear, naturalistic response
Backplate design provides smooth, natural sound and consistent off-axis response
Electronic design provides low noise without the use of integrated circuits
Transformerless design for transparency and clarity
Class-A circuitry for a high dynamic range and transient response without distortion
-10 dB and -20 dB pads, enabling a wide range of applications and close-mic techniques for brass instruments, snare drums, and more
Low-pass filters, selectable between 80 Hz and 160 Hz
All-metal chassis provides efficient rejection of electrical interference and noise
Includes two mic clips, each with a thread adapter
Includes two windscreens
Includes stereo bar for mounting microphones for stereo recording
includes a robust metal caseIn the Box:
sE Electronics sE8 Small-Diaphragm Condenser Microphone (Matched Pair)
Set of Mic Clips and Thread Adapters
Set of Windscreens (2x)
Stereo Mounting Bar
Metal Flight CasesE Electronics sE8 Specifications:
Microphone
Sound Field Mono
Capsule Condenser
Polar Pattern Cardioid
Circuitry Solid-State
Pad -10 dB
-20 dB
High-Pass Filter 80 Hz, 6 dB/Octave
160 Hz, 6 dB/Octave
Performance
Frequency Range 20 Hz to 20 kHz
Maximum SPL Cardioid: 159 dB SPL Peak
Impedance Cardioid: 110 Ohms
Load Impedance 1 Kilohms
Sensitivity Cardioid: 25 mV/Pa
Signal-to-Noise Ratio Cardioid: 81 dB
Equivalent Noise Level Cardioid: 13 dB A-Weighted
Connectivity
Output Connectors 1 x XLR 3-Pin
Power
Operating Voltage 48 V
Operating Current Consumption 2.7 mA
Physical
Dimensions ø: 0.91 x L: 4.72" / ø: 23 x L: 120 mm
Weight 4.97 oz / 141 g
For export (= shipments outside of Singapore) we do not charge GST. In this case, please refer to the prices excl GST.