Genelec 8050B Active Two-Way 8" Studio Monitor (Single, Producer Finish)

S$ 2,283.49
(S$ 2,283.49 excl GST)
Special order! Expected availability: 5+ weeks Not refundable/exchangeable
What?! Seen it cheaper somewhere?
Please tell us so we can try to match it!
Key Features:
  • 8" Woofer, 1" Tweeter
  • 150W Bass Amplifier
  • 120W Treble Amplifier
  • Auto Switching to Standby Saves Power
  • Curved Edges Reduce Distortions
  • Wide On and Off Axis Response
  • Die-Cast Aluminum Enclosure
  • Iso-Pod Table Stand Reduces Vibration
Show moreShow less
  • The 8050B Active Two-Way 8" Studio Monitor from Genelec provides an accurate reproduction of the source material in a compact form-factor with high output. Its die-cast aluminum enclosure features a rounded shape, which minimizes distortions caused by edge diffraction. The metal dome tweeter is surrounded by a smoothly-shaped Directivity Controlled Waveguide, which helps to create an even response when listening both on and off axis.

    The 8050B is built with Intelligent Signal Sensing (ISS) technology which automatically activates the speaker when an audio signal is detected, and puts it in Standby Mode when no signal is present, reducing the energy consumption to less than 0.5 watts. The 8050B features a 120 watt high frequency amplifier for its 1" tweeter, and a 150 watt low frequency amplifier for its 8" woofer. The bass response is expanded by a rear-facing reflex port, and a separately available Genelec subwoofer can be used to monitor a wider array of frequencies.

    • An included Iso-Pod table stand insulates the speaker from vibration and enables you to tilt its position upward or downward
    • The Iso-Pod can be attached to the base or side of the monitor, for vertical or horizontal positioning
    • Well-suited for near-field studio monitoring, control rooms, editing suites, surround sound applications and multimedia entertainment systems
    • Rear-facing Tone Controls enable you to optimize the speaker to its environment
    • Threaded holes for Omnimount Series 60 brackets and K&M loudspeaker mounts
    • More compatible mounting accessories, such as ceiling mounts and wall brackets, are available separately
    • Active crossover filters
    • Driver unit protection circuitry
    • Fully magnetically shielded
  • Inputs
    1x XLR balanced
    Frequency Response
    38 Hz to 20 kHz (± 2 dB)
    35 Hz to 21 kHz (-3 dB)
    Crossover Frequency
    3.0 kHz
    LF Amplifier
    150W
    HF Amplifier
    120W
    Maximum SPL
    110 dB
    Low Frequency Driver
    8" (205 mm)
    High Frequency Driver
    1" (25 mm) metal dome
    Controls
    Sensitivity Adjustment Dial
    Power Switch
    Tone Controls:
    Treble Tilt (Off, -2 dB, -4dB, +2 dB @ 15 kHz)
    Bass Tilt (Off, -2 dB, -4 dB, -6 dB @ 100 Hz)
    Bass Roll-Off (Off, -2 dB, -4 dB, -6 dB @ 35 Hz)
    Desktop Control (-4 dB @ 160 Hz)
    Mounting Options
    Tabletop (with included Iso-Pod)
    Four 0.24 x 0.39" (6 x 10 mm) threaded holes for Omnimount Series 60 brackets and K&M loudspeaker mounts
    Enclosure Material
    Die-cast aluminum
    Power Supply (AC)
    120V
    Voltage Range
    ±10%
    Power Consumption
    Idle: 10W
    Standby: 0.5W
    Full Output: 170W
    Dimensions
    With Iso-Pod: 17.8 x 11.3 x 10.9" (452 x 286 x 278 mm)
    Without Iso-Pod: 17.1 x 11.3 x 10.9" (433 x 286 x 278 mm)
    Weight
    28 lb (12.7 kg)

You may also like:

Top Seller! | XLR Male to XLR Female Cable, 2 meters
S$ 25.00
(S$ 25.00 excl GST)

For export (= shipments outside of Singapore) we do not charge GST. In this case, please refer to the prices excl GST.

Products
Brands
Products
Brands