Video Conference BYOD Package with Panasonic Camera + Extron HDMI Switcher + MediaPort 200 + MPA 152 Plus + SM3 + LG55UN731C & CABLES

Panasonic AW-UE4 Wide Angle 4K PTZ Camera

Product Specifications

Dimensions (W x H x D) 4-53/64 inches x 5-5/32 inches x 5-11/32 inches (123 mm x 131 mm x 136 mm)
Footnote Preliminary specifications are subject to change without prior notice.
LENS Digital zoom: 4x
Internal Microphone Yes (with mute function)
VIDEO OUTPUT HDMI, IP, USB
Power Requirements DC 5 V (USB)
DC 42 V - 57 V (PoE)
Tilting Range 50° (±25°)
Imaging Sensors 1/2.5-type MOS
Panning range 220° (±110°)
Camera/pan-tilt head control Manual adjustment
Angle of View Range 111°
*All specifications are preliminary and subject to change without prior notice.

Extron MediaPort 200 HDMI and Audio to USB Scaling Bridge

Video input and loop through
Number/signal type 1 HDMI/DVI
1 HDMI/DVI loop-through
Connectors 1 female HDMI type A
1 female HDMI type A loop-through
Horizontal frequency 15 kHz to 100 kHz
Vertical frequency 24 Hz to 75 Hz
Resolution range 640x480 through 1600x1200, 1920x1200 (with reduced blanking), 480i, 576i, 480p, 720p, 1080i, and 1080p
Digital pixel data bit depth 8, 10, and 12 bits per channel; 165 MHz pixel clock
Standards DVI 1.0, HDMI 1.4, HDCP 1.3

Video processing
Colors 11 million (8-bit 4:2:2 processing)

Video output
Number/signal type 1 USB digital video
Connectors 1 female USB type B
Power for active cables 1.0 watts max for the HDMI loop-through
HDMI peripheral device power 200 mA per output
USB scaled resolutions 320x1801,3, 320x2401,3, 424x2401,3, 640x3601,3, 640x4801,3, 848x4801,3, 960x5401,3, 720p1,3, 1080p1,2
1 = at 15 Hz, 2 = at 24 Hz, 3 = at 30 Hz

USB encoding
Number/signal type 1 USB (scaled, non-HDCP compliant)
Vertical frequency 15 Hz, 24 Hz (1080p only), 30 Hz
Video encoding MJPEG (4:2:2 or 4:2:0)
Resolution 320x180 through 1080p
Audio PCM, 24-bit, 48 kHz
Bit rate Up to 60 Mbps
USB standards USB 2.0 high speed, USB 1.1 full speed

USB device ports
Number/signal type 1 USB peripheral port
Connector 1 female USB type 2.0 type B
Maximum built-in USB hubs 0
Minimum built-in USB hubs 0

Audio
Gain Unbalanced output, -6 dB; balanced output, 0 dB
Frequency response 20 Hz to 20 kHz, ±0.2 dB
THD + Noise 0.03%, 20 Hz to 20 kHz at maximum level
S/N >90 dB, 20 Hz to 20 kHz at maximum balanced output (unweighted)
Crosstalk ≤-90 dB @ 20 Hz to 20 kHz, fully loaded

Audio input
Number/signal type 1 stereo, de-embedded from HDMI (PCM only)
1 stereo line level, balanced or unbalanced
1 mono mic/line level, balanced or unbalanced (with available phantom power)
2 stereo USB, embedded (communications and program audio)
Connectors 1 female HDMI
(1) 3.5 mm, 5 pole captive screw, for line level (stereo)
(1) 3.5 mm, 3 pole captive screw, for mic/line level
1 female USB B
Impedance >10k ohms unbalanced, >20k ohms balanced
Nominal level Line inputs: +4 dBu, -10 dBV, adjustable
Mic/line inputs: -60 dBV, +4 dBu, -10 dBV, adjustable
Maximum level +21 dBu, balanced, when input gain is set to 0 dB, at rated THD+N
CMRR >75 dB @ 1 kHz
Input gain adjustment Line input: -18 dB to +24 dB, in 0.1 dB steps
Mic input: -18 dB to +60 dB in 0.1 dB steps
DC phantom power +48 VDC ±10% (can be switched on or off for the mic/line input)
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output
Number/signal type 1 stereo, balanced or unbalanced, on a 3.5 mm, 5 pole captive screw connector. Can be configured as stereo or dual mono (variable).
2 mono, balanced or unbalanced (variable), on a shared 5 pole captive screw connector
1 stereo USB (embedded)
1 HDMI (loop output embedded)
Connectors (2) 3.5 mm, 5 pole captive screw
1 female USB type B
1 female HDMI
Impedance 50 ohms unbalanced, 100 ohms balanced
Gain error ±0.1 dB channel to channel
THD 0.03%, 20 Hz to 20 kHz at maximum level
Maximum level (Hi-Z) >+21 dBu, balanced; >+15 dBu, unbalanced
Output volume range -100 dB to 0 dB, in 0.1 dB increments

Communications
Serial control port 1 bidirectional RS-232 on (1) 3.5 mm, 5 pole captive screw connector, shared with +12 V remote power on rear panel
Serial control pin configuration Pin 1 = Tx, pin 2 = Rx, pin 3 = ground
Baud rate and protocol 9600 baud, 8 data bits, 1 stop bit, no parity
Digital I/O control 2 digital inputs on (1) 3.5 mm, 5-pole captive screw connector, shared with two digital outputs and a common ground
2 digital outputs on (1) 3.5 mm, 5-pole captive screw connector, shared with two digital inputs and a common ground
Remote power (1) +12 V DC power on (1) 3.5 mm, 5 pole captive screw connector, shared with RS-232 port; 100 mA
USB control port 1 female USB mini-B (front panel Config port)
USB standards USB 2.0
Ethernet control port 1 female RJ-45
Ethernet data rate 10/100/1000Base-T, half/full duplex with autodetect
Ethernet protocol ARP, ICMP (ping), IP, TCP, DHCP, HTTP, HTTPS, SSH, SFTP, SNMP, Telnet, IEEE 802.1X
Program control Extron Product Configuration Software (PCS) for Windows®
Extron Simple Instruction Set™ (SIS™)
Microsoft® Internet Explorer®
Extron Toolbelt

General
Power supply Internal
Input: 100-240 VAC, 50-60 Hz
Power consumption 18.9 watts
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
​Operation: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Passive; side and rear vents
Thermal dissipation 59.2 BTU
Mounting
Rack mount Yes, with optional rack shelf
Furniture mount Yes, with optional under-desk or through-desk mounting kit
Enclosure type Metal
Enclosure dimensions 1.66" H x 8.68" W x 9.5" D (1U high, half rack wide)
(4.2 cm H x 22.1 cm W x 21.6 cm D)
(Depth excludes connectors.)
Product weight 2.3 lbs (1.4 kg)
Regulatory compliance CE, c-UL, CE, C-tick, FCC Class A, ICES, UL, VCCI, RoHS, WEEE
Product warranty 3 years parts 

NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(5462-D7)

Shipping Dimensions and Weights
Part # 60-1488-01
Height Width Depth 5.0" (12.7 cm) 14.0" (35.6 cm) 15.0" (38.1 cm) 
Weight 4.0 lbs (1.81 kg)

Extron SW2 HD 4K 2-Input HDMI Switcher

Frame rate1 24, 25, 30, 50, or 60 fps
Chroma sampling1 4:4:4, 4:2:2, or 4:2:0
Color bit depth1 8 bits per color
Signal type HDMI 1.4, HDCP 1.4
Max. video data rate 10.2 Gbps (3.4 Gbps per color)
NOTE 1Subject to the maximum data rate limit. Use our calculator at www.extron.com/4Kdatarate to determine video parameters supported by this data rate.

Video
Maximum data rate 10.2 Gbps (3.4 Gbps per color)
Maximum pixel clock 300 MHz (600MHz for 4K with 4:2:0 chroma subsampling)
Resolution Up to 1920 x 1200 or 1080p @ 60 Hz, 12-bit color
4K (4096x2160) @ 30 Hz, UHD (3840x2160) @ 30 Hz
4K/UHD @ 60 Hz with 4:2:0 chroma subsampling
Formats RGB and YCbCr digital video
Standards DVI 1.0, HDMI 1.4, HDCP 1.4
NOTE The SW HD 4K Series switchers support TMDS data rates up to 10.2 Gbps, Deep Color up to 12-bit, 3D**, HD lossless audio, and other HDMI specification features.
**Extron strongly recommends compatibility testing while designing and before installing any 3D system. There are several unique 3D formats in use by source devices and display manufacturers. The 3D support in this product is limited to signals operating within 164 MHz pixel clock and requires format and EDID compatibility between source and sink devices. Please contact an Extron Application Engineer for more information.

Video input
Number/signal type 2, 4, 6, or 8 (depending on model) single link HDMI (or DVI-D*)
Connectors 2, 4, 6, or 8 female HDMI
Video output
Number/signal type 1 single link HDMI (or DVI-D*)
Connectors 1 female HDMI
NOTE *Appropriate HDMI to DVI-D cables or adapters are required for DVI signal input/output.
Communication — Switcher
Serial control port 1 RS-232, 3.5 mm, 3 pole captive screw connector
Pin configuration 1 = Tx, 2 = Rx, 3 = GND
Baud rate and protocol 9600 baud, 8 data bits, 1 stop bit, no parity
Auto-input switching (1) 3.5 mm, 2 pole captive screw connector
Pin configuration Pins 1 and 2 of captive screw connector shorted together enable auto-input switching
Contact closure
SW2 HD 4K (2) 3.5 mm captive screw, 3 pole (shared with Tally output)
Tally output
SW2 HD 4K (2) 3.5 mm captive screw, 3 pole (shared with Contact closure)
Tally output power (1) 3.5 mm captive screw, 3 pole for +5 VDC, 0.2 A
IR controller module IR 102 remote control (optional)
30' maximum, 40 degrees off axis
Program control Extron Simple Instruction Set™ (SIS™)

General
Power supply
SW2 HD 4K, External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 1.5 A, 18 watts
Power Consumption:
Device 6 watts, 12 VDC
Device and power supply 8 watts, 12 VDC
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, no vents
Thermal dissipation
Device 19.8 BTU/hr
Device and power supply 24.4 BTU/hr
Mounting
Rack mount Yes, with optional 1U rack shelf
Furniture mount Yes, with optional under-desk mounting kit or through-desk mounting kit
Enclosure type Metal
Enclosure dimensions
1.75" H x 8.75" W x 3.0" D (1U high, half rack wide)
(4.4 cm H x 22.2 cm W x 7.6 cm D)
(Depth excludes connectors.)

Product weight 0.5 lb (0.3 kg)
Regulatory compliance CE, C-tick, c-UL, KC-mark, UL, FCC Class A, ICES, VCCI
Complies with appropriate requirements of RoHs and WEEE.
Product warranty 3 years parts 
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(4436-D8)

Shipping Dimensions and Weights
Part # 60-1483-01
Height Width Depth 3.0" (7.6 cm) 8.0" (20.3 cm) 11.0" (27.9 cm)
Weight 1.86 lbs (0.84 kg)

Extron MPA 152 Plus Stereo Amplifier

Audio
Voltage gain
Balanced 25x (28 dB)
Unbalanced 50x (34 dB)
Stereo channel separation >60 dB @ 1 kHz
CMRR 74 dB (typical) @ 1 kHz
Bass adjustment ±10 dB @ 80 Hz (reference) to 1 kHz (2 dB tolerance)
Treble adjustment ±10 dB @ 10 kHz (reference) to 1 kHz (2 dB tolerance)

Audio input
Number/signal type 1 stereo, balanced/unbalanced input
2 stereo, unbalanced inputs
(The three inputs are individually buffered and summed together.)
Connectors (1) 3.5 mm captive screw connector, 5 pole (main input)
(1) 3.5 mm mini audio jack (tip, ring, sleeve)
1 pair female RCA
Impedance >10k ohms unbalanced/balanced, DC coupled
Maximum level
RCA and TRS inputs +9 dBV (unbalanced) at 1% THD+N
Captive screw input +12 dBu (balanced) at 1% THD+N
Input sensitivity
Balanced -8 dBu
Unbalanced -16 dBV
Input signal detection threshold RCA and mini audio jacks: -53 dBV (2.24 mV) ±3 dB, unbalanced
Captive screw connector: -46 dBu (3.88 mV) ±3 dB, balanced
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu

Audio output
Number/signal type 1 stereo or 2 mono (2 channels total)
Connector (1) 5 mm captive screw connector, 4 pole
Load impedance 4 ohms, minimum
Amplifier type Class D
Output power 8 watts rms per channel, 8 ohms, 1 kHz, 1% THD
15 watts rms per channel, 4 ohms, 1 kHz, 1% THD
Frequency response 20 Hz to 20 kHz, +1/-3 dB @ 8 ohms
THD + Noise 0.1% -3dB below clipping @ 1 kHz, 8 ohm load
S/N 90 dB, 20 Hz to 20 kHz, unweighted
Damping factor >100 at 8 ohms
Communications — amplifier
Control port (1) 3.5 mm captive screw connector, 3 pole
Pin configuration Pin 1 = +10 VDC, 50 mA (max.), pin 2 = volume/mute (variable voltage), pin 3 = GND
Volume control voltage range 0 V (mute) to 10 V (maximum volume)

General
Power supply External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 2 A, 24 watts
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, no vents
Mounting
Rack mount Yes, with optional 1U rack shelf or back of rack mounting kit
Furniture mount Yes, with optional mini under desk mounting kit
Pole mount Yes, with optional pole mounting kit
Enclosure type Metal
Enclosure dimensions 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors.)
Product weight 0.6 lbs (0.3 kg)
Regulatory compliance
Safety BSMI, CCC, CE, c-UL, UL
UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release, excluding the power supply; meets UL 60065 for safety.
EMI/EMC CE, C-tick, FCC Class B, ICES, KCC, VCCI
Environmental Complies with the appropriate requirements of CEC, ENERGY STAR® (ENERGY STAR qualified amplifier), EU code of conduct, RoHS, WEEE
Product warranty 3 years parts 
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(4815-D6)

Shipping Dimensions and Weights
Part # 60-844-03 
Height Width Depth 2.75" (7.0 cm) 10.12" (25.7 cm) 7.43" (18.9 cm) 
Weight 2.3 lbs (1.04 kg)

Extron SM3 3" Surface Mount Speaker

Audio/acoustic and electrical
Speaker type 1-way, full range, indoor surface mount speaker
Frequency range 100 Hz to 20 kHz, -10 dB, full space
Power capacity 15 W (rms) continuous pink noise (per IEC 60268-5)
30 W (rms) continuous program
Nominal sensitivity 83 dB SPL, 1 W, 1 m, full space
Nominal coverage angles Horizontal: 120° (1 kHz - 4 kHz, weighted 2 kHz - 4kHz)
Vertical: 130° (1 kHz - 4 kHz, weighted 2 kHz - 4kHz)
Nominal impedance 8 ohms
Driver (1) 3" (76.2 mm) paper cone
Input connectors
Speaker 2 recessed pins
Mounting plate (1) 10 mm Euro-style captive screw terminal block, 2 pole

General
Package 2 speakers (1 pair) with mounting kit
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Mounting Wall mountable with included mounting plates (0° and 10°)
NOTE Speaker mounting angle is fixed at 0° or 10° from vertical based on the mounting plate used.
Enclosure type Plastic, trapezoidal, with molded grille and front bass reflex port
Enclosure outer dimensions
With 0° mounting plate 8.75" H x 5.75" W x 4.0" D
(22.2 cm H x 14.6 cm W x 10.2 cm D)
With 10° mounting plate 8.9" H x 5.75" W x 5.0" D
(22.6 cm H x 14.6 cm W x 12.7 cm D)
Product weight Single: 2.0 lbs (0.9 kg)
Regulatory compliance
Safety CE
Environmental Complies with the appropriate requirements of RoHS, WEEE.
Product warranty 3 years parts
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.

Shipping Dimensions and Weights    
Part # 42-133-02
Height Width Depth 14.0" (35.6 cm)9.0" (22.9 cm)12.5" (31.8 cm)
Weight 6.6 lbs (2.99 kg)

Sennheiser MEB-114S Boundary Microphone

Color Black, White
LED light ring: red / green
Dimensions 85 x 100 x 25 mm (WxDxH)
Connector clip contact, trigger signal at the logic connector: Logic in (LED control), GND, Logic out (switch signal)
Frequency response 40 Hz – 20 kHz
Max. sound pressure level 140 dB
Transducer principle pre-polarized condenser microphone
Weight 291 g
Pick-up pattern cardioid
Nominal impedance 200 Ω
Phantom powering P 24 - P 48
Operating temperature -10 ° … +50 °C
Equivalent noise level 29 dB (A)
Equivalent noise level weighted as per CCIR 468-3 39 dB (CCIR)
Current consumption 5.3 mA
Output voltage
Logic out: High level output voltage > 2.4 V, low level output voltage 0.4 V
Output voltage
Logic in: High level input voltage > 2.0 V, Low level input voltage 0.8 V
Acoustics boundary layer microphone
Dynamic range 111 dB (A)
Sensitivity 10 mV/Pa

LG 55UN731C 55' 4K UHD Commercial Display

Display

Screen Size 70” / 65” / 55” / 50” / 49” / 43”
Resolution 3,840 × 2,160
IPS Panel Yes (Wide Viewing Angle, Except 70” / 65” / 55” / 50” / 43”)
Wide Viewing Angle Yes (Wide Viewing Angle, Except 70” / 65” / 55” / 50” / 43”)
BLU Type Direct

Video
(Picture Quality)

Processor Quad Core Processor 4K
Image Enhancing Image Enhancing
HDR / HDR10 Pro / HLG Active HDR / Yes (4K / 2K) / Yes (4K / 2K) FILMMAKER MODETM Yes HDR Effect Yes (4K / 2K)
Dynamic Tone Mapping / Pro HDR Dynamic Tone Mapping
Dimming Algorithm LG Local Contrast
Upscaler 4K Upscaler
Picture Mode 10 Modes (Vivid, Standard, Eco, Cinema, Sports, Game, HDR Effect, Filmmaker, (ISF) Expert (Bright Room, Dark Room))

Audio

Sound Output 20 W (10 W per Channel)
Channel 2.0 ch
Direction Down Firing
Surround Mode Ultra Surround
Bluetooth Surround Ready Yes (Bluetooth Required)
LG Sound Sync Yes (Bluetooth Required)
Auto Notification (Bluetooth Easy Paring) Yes (Bluetooth Required)
Sound Share Yes

Broadcasting
System

Digital TV Reception (Terrestrial, Cable, Satellite) DVB-T2, DVB-C (VH Only), -
Analog TV Reception Yes

AI Function

ThinQ, Intelligent Voice Recognition, Speech to Text, LG Voice Search, Google Assistant, Amazon Alexa, AI UX, AI Home, AI Recommendation,
Intelligent Edit, Home Dashboard, Auto Device Detection, Smart Speaker Compatible, Google Home Connection, Amazon Echo Connection,

LG ThinQ Hub Device, LG Smart Speaker (WK7, WK9), Mobile Connectivity, ThinQ App

Smart Feature

webOS Smart TV, Number of CPUs (Quad,) Magic Remote Control (Built-In), Quick Access, Universal Control, 360° VR Play, Related Content Search,
LG Store, DIAL, Web Browser, Music Player, TV On with Mobile, Wi-Fi TV On, Bluetooth Low Energy On, Network File Browser,
Block Access to Harmful Site, Live Plus (ACR-based Bilateral Service (webOS5.0 : Australia (Asia))), Hotel Mode, Sports Alert, Music Discovery

Connectivity

Screen Share, HDMI 2.0 (Rear / 2 Side), Features Specified in HDMI 2.1 (HDMI 2.0), Simplink (HDMI CEC), eARC / ARC (Audio Return Channel (ARC (HDMI 2)),
USB (Rear / Side), LAN (Rear), Component (Rear, Component In / AV in Common), Composite In (AV (Rear, Component In / AV in Common)),

RF In (RF), SPDIF (Optical Digital Audio Out (Rear)), Wi-Fi (802.11 ac), Bluetooth (V 5.0)

Dimension W × H × D / Weight (with Stand) Differ by Size, Region W × H × D / Weight (without Stand) Differ by Size, Region W × H × D / Weight (Shipping) Differ by Size, Region

Power & Green

Power Supply AC 100-240 V ~, 50/60 Hz (Differ by Region)
Standby Power Consumption Under 0.5 W
Power Consumption (Max) Differ by Size, Region
Energy Saving Mode Yes
Illuminance Green Sensor Yes
Energy Standard Yes (Differ by Region)
Accessory Remote MR20
Power Cable Yes (TV Detached)