The KSM32 is a premium side-address cardioid condenser microphone for highly critical studio recording and live sound productions. With an extremely flat, extended frequency response, the KSM32 provides transparent reproduction of the original sound source. A 15 dB attenuation switch allows the KSM32 to handle the high sound pressure levels associated with drums, percussion, and ensembles.
KSM32/CG Includes ShureLock Stand Mount and Padded Zipper Bag (Charcoal Gray Finish)
In the Box
Shure KSM32/CG Large-Diaphragm Cardioid Condenser Microphone (Charcoal Gray)
ShureLock Stand Mount
Padded Zippered Bag
Limited 2-Year WarrantyNot in the Box
XLR Microphone Cable (Not Included)
Microphone Stand (Not Included)Cartridge Type: Permanently-biased Condenser
Frequency Response: 20 to 20,000 Hz
Directional Polar Pattern: Cardioid
Output Impedance: 150 ohms (actual)
Attenuation Switch: 0 or -15 dB attentuation
Low Frequency reponse switch: flat; -6 db/octave below 115 Hz;-18 dB/octave below 80 Hz
Phantom Power: 48 Vdc ±4 Vdc positive pins 2 and 3
Current Drain: 4.65 mA typical at 48 Vdc
Common Mode Rejection: > 50 dB, 20 Hz to 20 kHz
Polarity: Positive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3
Dimensions and Weight: 55.9 mm (2.20 in.) maximum body diameter,187 mm (7.37 in.) long and 490 grams (17.3 oz.)
Sensitivity (typical, at 1000hz;1 Pa = 94 dB SPL): -36 dBV/Pa (16 mV)
Self-noise (typical, equivalent SPL;A-weighted, IEC 651): 13 dB
Maximum SPL at 1000hz: 2500 ohms load (attenuator on),139 (154) dB and 1500 ohms load (attenutator on),133 (148) dB
Output Clipping Level: 2500 ohms load (+9 dBV) and 1000 ohms load (+3 dBV)
Dynamic Range: 2500 ohms load (126 dB) and 1000 ohms load (119 dB)
Signal to Noise ratio: 81 dB
Total Harmonic Distortion (THD),2500 ohms load: 0.08% for a 120 dB equivalent SPL input.
You may also like:
For export (= shipments outside of Singapore) we do not charge GST. In this case, please refer to the prices excl GST.
