RØDE microphones have been the go-to for broadcasters for decades. Trusted for their exceptional build quality and professional performance in everything from film and TV production to newsgathering, radio and podcasting, the RØDE name is ubiquitous in studios and on sets everywhere. The Broadcaster is a premium large-diaphragm, end-address condenser microphone designed to provide the ultimate performance for broadcast vocal applications. Its frequency response has been tailored for radio broadcast, podcasting and voice-over applications, with a rich, controlled proximity effect that has made it an industry standard in radio stations the world over. It features an internal pop filter to control plosives and a switchable 75Hz high-pass filter.
The Broadcaster features an internal pop filter, designed to minimise plosives sounds that can overload the microphone capsule and distort the audio output. In addition to the Broadcaster’s native 20Hz-20kHz response, a selectable high-pass filter at 75Hz is available which will prevent low-end noise such as air conditioners and traffic from being recorded.
The Broadcaster features an "On-Air" indicator on the body that can be wired for external activation by the "Channel On/Mute" function on many consoles. If not connected to a console or switch, the indicator will remain lit whenever the microphone has power.
In The Box
- RODE Broadcaster Large-Diaphragm Cardioid Condenser Microphone
- RODE Stand Mount
- RODE ZP1 Zip Pouch
- 5-Pin "On-Air" Indicator AdapterMicrophone
Primary Applications: Broadcast, Podcast
Form Factor: Large Diaphragm Mic / Stand / Boom Mount
Intended Sound Sources: Speech/Voice Over
Sound Field: Mono
Operating Principle: Pressure Gradient
Capsule: Condenser
Diaphragm: 1" / 25.40 mm
Polar Pattern: Cardioid
Orientation: End Address
Circuitry: Solid-State (JFET)
Pad: None
High-Pass Filter: 75 Hz
Tone Adjustment: None
Gain Adjustment: None
Indicators: 1 x Single LED (Power, Status)
On-Board Controls: High-Pass Filter
Windscreen: Built-In
Performance
Frequency Range: 20 Hz to 20 kHz
Maximum SPL: 128 dB SPL (1 kHz, 1% THD, 1-Kilohm Load)
Impedance: 40 Ohms
Sensitivity: -34 dBV/Pa at 1 kHz
Output Level: 2 dBu (Max, 1 kHz)
Dynamic Range: 114 dB A-Weighted
Signal-to-Noise Ratio: 80 dB A-Weighted
Equivalent Noise Level: 14 dB SPL A-Weighted
Connectivity
Output Connectors (Analog): 1 x XLR 3-Pin Male (on Mic)
Headphone Connector: None
Power
Bus Power: None
Operating Voltage:
- 24 V (Phantom Power)
- 48 V (Phantom Power)
Operating Current Consumption: 5 mA (Phantom Power)
Physical
Color: Stainless Steel
Mounting: Mic Clip/Stand Adapter (Included)
Included Case: Zipper Pouch
Included Filters: None
Construction Material: Stainless Steel
Dimensions: H: 2 x W: 2.6 x L: 6.6" / H: 50 x W: 65 x L: 167 mm
Weight: 1.3 lb / 577 g
Packaging Info
Package Weight: 2.015 lb
Box Dimensions (LxWxH): 10.7 x 5.3 x 2.4"
You may also like:
For export (= shipments outside of Singapore) we do not charge GST. In this case, please refer to the prices excl GST.
