Lewitt LCT-240 Pro Large Diaphragm Condenser Microphone (Black)

was: S$ 206.42
now: S$ 127.52
(S$ 127.52 excl GST)
Out of stock
What?! Seen it cheaper somewhere?
Please tell us so we can try to match it!

2018 MusicTech Choice Award Winner

Key Features:
  • Condenser microphone for all levels
  • Tailored for easy home recording
  • Record vocals, spoken word, and instruments
  • Studio sound quality
  • Cardioid polar pattern
  • XLR connector with gold plating
Show moreShow less
  • Buy condenser microphones online from Singapore's Premier AVL Superstore. Widest range in Singapore, in stock!
    A mic for beginners and pros alike.
    Whatever you're going to record with the LCT 240 PRO will shine right from the start.

    This large-diaphragm microphone allows for basic recording needs and provides a great start for a beginner. Like all condenser microphones, this microphone requires 48v phantom power and is built with a gold-plated, 3-pin XLR connector.

    Getting started

    1. Attach the LCT 240 PRO to a stable, sturdy stand using the DTP 40 Mts microphone mount.
    2. Connect the LCT 240 PRO via a standard 3-pin XLR cable to an audio interface, microphone preamplifier or a mixing console capable of providing 48 V phantom power (P48).
    3. Turn phantom power on.
    4. Set the input gain on your mixing console, preamp, etc. accordingly.
    5. To ensure best sound quality, do not cover any part of the grille.
    6. You are ready to go!

    Vocal recordings // Keep a short distance relative to the microphone (approx. 15 cm), this way the room acoustics are not overly prominent and you receive a full sounding and dry vocal recording.
    Miking guitar amps // To record a guitar or bass amplifier with your LCT 240 PRO, place it close to the speaker of your combo or cabinet, directed slightly off-axis to the speaker.
    Recording acoustic guitar // An easy and very common way to record acoustic guitar using only one microphone is to place it 20-30 cm away from the instrument, pointing towards the area where the neck and body meet.
    Record drums // Use it to for snare, cymbals, overhead or to record room sound.

    // Please Note
    // Before switching off the microphone or disconnecting the cables, mute the volume of connected equipment.
    // Do not apply extensive force when disconnecting a cable, always pull on the connector and not on the cable itself.
    // Microphones which are not in use should not remain on the stand gathering dust or be unnecessarily be exposed to humidity. Keep it dry - either in the original box or in another suitable place.
    // Do not attempt to modify or fix the microphone as it would void your product warranty.
    // The casing of the microphone can be cleaned easily using a wet cloth, never use alcohol or another solvent for cleaning.

     In the Box
    // LCT 240 PRO
    // DTP 40 Mts, adjustable microphone mount
    // LCT 40 Wx, windscreen
    // DTP 40 Lb, leatherette bag

    Not in the Box
    XLR Microphone Cable (Not Included)
    Microphone Stand (Not Included)

  • Type
    Condenser, permanently polarized

    Acoustical operating principle
    Pressure gradient transducer

    Transducer Ø
    17 mm, 0.67 in

    Polar pattern
    Cardioid

    Sensitivity
    16.7 mV/Pa, -35.5 dBV/Pa

    Equivalent noise level
    19 dB (A), cardioid

    Max. SPL for 0.5 % THD
    142 dBSPL

    Dynamic range
    123 dB (A)

    Internal impedance
    100 Ω

    Rated load impedance
    1,000 Ω

    Supply voltage
    48 V ± 4 V

    Current consumption
    3.1 mA

    Connector
    Gold plated 3-pin XLR

    Microphone dimensions
    138 x 52 x 36 mm, 5.43 x 2.04 x 1.42 inch

    Microphone net weight
    310 g, 10.9 oz

You may also like:

Top seller!
was: S$ 61.47
now: S$ 39.90
(S$ 39.90 excl GST)

For export (= shipments outside of Singapore) we do not charge GST. In this case, please refer to the prices excl GST.

Products
Brands
Products
Brands