Catapult TX4L | Buy Radial Engineering direct from Singapore's Authorized Distributor for warranty assurance.
The Radial Engineering Catapult TX4L is a four-channel snake that is designed to route four channels of line-level signal across long distances using shielded Cat5/Cat6 cable, doing so with little to no signal degradation. As such, it’s useful in live-sound reinforcement applications, as it allows live sound stage techs to use relatively affordable cable to secure quality audio connections around large stages and venues. It’s also suitable for system contractors who can now utilize pre-wired networks to move audio throughout disparate rooms.
The Catapult TX4L gives you four XLR input jacks, as well as four XLR transformer-balanced through-outputs optimized for line-level signal. You’ll also note the two RJ45-type etherCON connections. One is an output, for use with the RX4L on the receiving end. The other is a throughput, and can be implementing in routing signal to additional Catapults. In total, you'll have the ability to split and route line-level signal to three different locations.
A ground-lift switch helps eliminate any noise issues on the Cat5 or Cat6 line, while a steel handle provides easy transport, and four bumpers protect the Ethernet jacks and ground-lift switch from wear and tear.
FEATURES:
Glass-filled, nylon XLR connectors
Nickel-silver contacts
4 x XLR through-outputs with line-level transformer isolation for additional routing
1 x Ethernet through-output for feeding additional Catapult models
Protective steel handle facilitates convenient transportation
Durable powder coat
Ground lift for the Cat5/Cat6 cable’s ground path to mitigate ground-loop noise
4 x bumpers used to protect Ethernet connectors and ground-lift switch from damage
Double-sided, military-spec grade circuit board for durability, full ground plane, and a marked reduction in radio-frequency interference
Radial push switches with durable metal outer casing, rated at over 20,000 cyclesRadial Engineering Catapult TX4L Specifications:
Audio Circuit Type Passive line splitter, transformer based
I/O 4 x XLR inputs
4 x XLR through-outputs
1 x RJ45-type etherCON output
1 x RJ45-type etherCON through-output
Frequency Response 7 Hz to approximately 20 kHz
Total Harmonic Distortion 0.0007% at 1 kHz
Dynamic Range 140 dB
Maximum Input +35 dBu
Minimum Load Impedance 100 Ohms
Intermodulation Distortion 0.003%
Common Mode Rejection > 113 dB
Ground Lift Disconnects ground on RJ45 connector
Construction 14-gauge steel chassis and outer shell
Finish Durable powder coat
Dimensions (L x W x H) 8.1 x 4.1 x 2.0" / 20.6 x 10.5 x 5.1 cm
Weight 2.6 lb / 1.2 kg
You may also like:
For export (= shipments outside of Singapore) we do not charge GST. In this case, please refer to the prices excl GST.