Remotely switched and metered Power Control with 12 x IEC C13 for usage in combination with a media management system. The power control can be used to switch connected electrical loads on and off and for current measurement. Up to 9 electrical quantities dimensions can be measured on the input side, as well as residual current measurement (see below). Two combined sensors (temperature, humidity and air pressure) can be connected to the two RJ45 connectors for environment monitoring. Thanks to standardised protocols such as HTTP/HTTPS, Telnet, RADIUS, MQTT and Modbus TCP, the device can be controlled with a media management system, a server or integrated into a monitoring software. Connecting to Crestron and Extron devices is done quickly, thanks to available drivers.
Toolless installation in media or IT racks (19 inches), furniture, pedestals and tables is made possible because the device’s rack ears are already attached. Each output can be switched and restarted individually. The outputs can be switched event-based by pre-set sensor thresholds and programmed schedules. The switching state and switch-on delays (0…9999 seconds) are freely adjustable for each Power Port. An automated reboot can be set individually per output using the integrated watchdog function (ICMP/TCP).
1 power connection (IEC C20, max. 16 A),
12 load outputs (IEC C13, max. 10 A)
1 RJ45 network connection (10/100 Mbit/s)
1 serial interface RS232 (Sub-D, 9-pin)
2 sensor inputs (RJ45) for optional sensors
Max. current (total): 16 A
Max. current (per port): 10 A
Power consumption: approx. 5 W
Operating temperature: 0-50 °C
Storage temperature: -20 – 70 °C
Relative humidity: 0 – 95 % (non-condensing)
High-Inrush Relay: Type 16 A, 30 A up to 4s and 80A up to 20ms
Overvoltage protection: Type 3, max. L-N, N/L-PE 10 kA
Watchdog (ICMP/TCP) for each outletDimensions
Dimensions (LxHxD): 43.9 x 4.4 x 17.8 cm
Weight: 2.2 kg
For export (= shipments outside of Singapore) we do not charge GST. In this case, please refer to the prices excl GST.
