Designed for education and corporate applications, this setup fits perfectly for a small classroom, studio or meeting room with false ceilings or when aesthetics is a concern. It is also very easy to deploy and configure. For existing spaces with a dedicated control system and for users that are reluctant to splurge on a complex audio system, the serial ports come in handy in terms of the integration with an existing control system.
When you buy Video Systems and solutions online from Singapore's Premier AVL Superstore, you will benefit from the support of our experienced team of experts. For Government sector customers, we are a GeBiz registered vendor with an EPPU grade S7.
Extron MVC 121 Plus Three Input Stereo Mixer with DSP
- Mixes two microphone inputs and one stereo line input to two stereo outputs
- DSP audio signal processing
- 24-bit/48 kHz analog-to-digital and digital-to-analog converters
- Fixed, low latency DSP processing
- DSP Configurator™ Software
- Intuitive Graphical User Environment
Extron XPA 2001-100V Power Amplifier
- 200 watts rms output power
- XPA 2001-100V - 1 x 200 watts @ 100 volts
- ENERGY STAR® qualified amplifier
- Professional grade signal-to-noise and THD+N performance
- Extron Patented CDRS™ - Class D Ripple Suppression
- Convection cooled, fanless operation
- Ultra low inrush current - no need for power sequencing
Extron SF26CT SoundField XD 6.5" Two-Way Ceiling Speaker with 8" Composite Back Can and 70/100 V Transformer
- 6.5" (165 mm) long throw woofer with a tuned bass reflex enclosure
- 3/4" (19 mm) ferrofluid-cooled dome tweeter
- 8" (203 mm) deep composite back can for plenum environments
- Frequency range: 65 Hz to 22 kHz
- 111° conical dispersion
- 65 watts continuous pink noise
- 130 watts continuous program
- Locking arms support ceilings up to 2.25" (57.1 mm) thick.
Package consists of
1 x Extron MVC 121 Plus Three Input Stereo Mixer with DSP
1 x Extron XPA 2001-100V Power Amplifier
4 x Extron SF26 CT SoundField XD 6.5" Two-Way Ceiling Speaker with 8" Composite Back Can and 70/100 V Transformer
1 x 3.5mm minijack to RCA cable for connection to laptop or music playback
1 x Professional speaker cable AWG16, grey jacket, tinned x 20m rollNot included - Get in touch with us to arrange a site visit and quote
Cabling and conduit
Height access by M.O.M Approved Scaffold Contractor
Installation, testing & commissioning by W.A.H certified workmen by BizSafe Level 3 contractor.Extron MVC 121 Plus Three Input Stereo Mixer with DSP
Audio
Gain Unbalanced output: -6 dB; balanced output: 0 dB
Frequency response 20 Hz to 20 kHz, ±0.3 dB
THD + Noise 0.02% @ 1 kHz, at maximum output level
S/N >100 dB, 20 Hz to 20 kHz, at maximum output, unweighted
Crosstalk -90 dB @ 1 kHz, fully loaded
CMRR >60 dB @ 1 kHz
Audio input
Number/signal type
Microphone inputs 2 mono, mic/line, balanced/unbalanced
Line input 1 stereo, line, balanced/unbalanced
Connectors
Microphone inputs (1) 3.5 mm captive screw connector, 6 pole
Line input (1) 3.5 mm captive screw connector, 5 pole
Impedance >10k ohms, balanced/unbalanced, DC coupled
Nominal level +4 dBu when level is set to 0 dB gain; adjustable from -60 dBu to +4 dBu (line input)
Maximum level +21 dBu, balanced, when input gain is set to 0 dB
Volume range
Line input -18 dB to +24 dB, adjustable per input
Mic input -18 dB to +60 dB, adjustable per input
Mic noise level -120 dBV (1 µVrms) at 40 dB gain
Mic phantom power +48 VDC, which can be switched on or off
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio processing
D/A conversion 24 bit, 48 kHz sampling
Audio output
Number/signal type 2 stereo, line, balanced/unbalanced
Connectors (2) 3.5 mm captive screw connector, 5 pole
Impedance 50 ohms unbalanced, 100 ohms balanced
Gain error ±0.2 dB channel to channel
Maximum level (Hi-Z) >+21 dBu, balanced; >+15 dBu, unbalanced
Control/remote — mixer/volume controller
Serial control port 1 bidirectional RS-232: 3.5 mm captive screw connector, 6 pole (uses 3 poles) (shared with digital input)
Baud rate and protocol 9600 to 115200 baud, 38400 baud (default), 8 data bits, 1 stop bit, no parity, no flow control
Serial control pin configuration 1 = Tx, 2 = Rx, 3 = GND
USB control port 1 front panel female mini USB B
USB standards USB 2.0, low speed
Program control Extron control/configuration program for Windows®
Extron Simple Instruction Set (SIS™)
Control — digital input ports
Number/type 3 digital input (configurable)
Connector (1) 3.5 mm captive screw connector, 6 pole (shared with RS-232 port, uses 4 poles)
Pin configuration 3 = GND; 4, 5, 6 = digital inputs 1, 2, 3
Digital inputs
Input voltage range 0-24 VDC
Input impedance 10k ohms
Threshold low to high >2.0 VDC
Threshold high to low 0.8 VDC
General
Power External
Input: 100-240 VAC, 50-60 Hz
Output: 12 VDC, 0.5 A
Power consumption
Device 3.5 watts
Device and power supply 4.9 watts
Thermal dissipation
Device 9.4 BTU/hr
Device and power supply 14.7 BTU/hr
Temperature/humidity Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, noncondensing
Operating +32° to +122°F (0° to +50°C) / 10% to 90%, noncondensing
Cooling Convection, no vents
Mounting
Rack mount Yes, with optional 1U rack shelf
Furniture mount Yes, with optional mini under-desk mounting kit
Pole mount Yes, with mini pole mount kit
Enclosure type Metal
Enclosure dimensions 1.7" H x 4.3" W x 3.0" D (1U high, quarter rack wide)
(4.3 cm H x 10.9 cm W x 7.6 cm D)
(Depth excludes connectors and knobs.)
Product weight 0.6 lbs (0.3 kg)
Regulatory compliance CE, C-tick, c-UL, UL, FCC Class A, ICES, VCCI
Product warranty 3 years parts
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(4789-D5)
Shipping Dimensions and Weights
Part # 60-1096-01
Height Width Depth 2.75" (7.0 cm) 10.12" (25.7 cm) 7.43" (18.9 cm)
Weight 1.86 lbs (0.84 kg)Extron XPA 2001-100V Power Amplifier
Audio
Voltage gain
XPA 2001-100V 81x (38 dB)
Stereo channel separation >75 dB @ 1 kHz
CMRR 75 dB @ 1 kHz (typical)
Audio input
Number/signal type 1 stereo or 2 mono, balanced/unbalanced
Connectors (1) 3.5 mm captive screw connector, 5 pole
Impedance >10k ohms unbalanced/balanced, DC coupled
Nominal level +4 dBu (1.23 Vrms), balanced
Maximum level +20 dBu (7.75 Vrms), balanced
Input sensitivity +4 dBu (1.23 Vrms) if driven by one input
-2 dBu (0.615 Vrms) if both inputs are summed
Input signal detection threshold -40 dBu ±3 dB, balanced
NOTE 0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV ≈ 2 dBu
Audio output
Number/signal type
XPA 2001-100V 1 mono, 100 V line
Connectors (1) 5 mm screw lock captive screw connector, 2 pole
NOTE These connectors accept wires of 22 AWG to 12 AWG.
Load impedance
XPA 2001-100V 50 ohms minimum
Amplifier type Class D
Output power
XPA 2001-100V 200 watts rms, 100 V, 1 kHz, 0.1% THD
Frequency response 20 Hz to 20 kHz, ±1 dB
THD + Noise 0.1% @ 1 kHz at 3 dB below clipping
S/N 100 dB, 20 Hz - 20 kHz, unweighted
Damping factor
XPA 2001-100V >100 @ 50 ohms
High pass filter 80 Hz, 12 dB per octave rolloff (switch selectable)
Control/remote — amplifier
Control port (1) 3.5 mm captive screw connector, 5 pole
Pin configurations
DC volume control (analog) Pin 1 = +10 VDC, 50 mA (max.), pin 2 = volume/mute (variable voltage), pin 3 = GND
Volume control voltage range 0 V (mute) to 10 V (maximum volume)
Standby power control (contact closure) Pin 4 = GND, pin 5 = standby
General
Power supply Internal
Input: 100-240 VAC, 50-60 Hz
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Cooling Convection, no vents, with internal heat sinks
Protection Clip limiting, thermal, short circuit, DC output
Indication Limiter/Protect LED indicates the onset of clip limiting, thermal cycling, or a short circuit
Mounting
Rack mount Yes, with optional 1U rack shelf
Enclosure type Metal
Enclosure dimensions 1.7" H x 8.7" W x 9.5" D (1U high, half rack wide)
(4.3 cm H x 22.1 cm W x 24.1 cm D)
Product weight 2.5 lbs (1.1 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Regulatory compliance
Safety BSMI, CCC, CE, c-UL, GS, KC Mark, PSE, S Mark, UL
UL rated for use in plenum airspaces: meets UL 2043 for heat and smoke release; meets UL 60065, IEC 60065, and BSEN 60065 for AV equipment.
EMI/EMC CE, CISPR 22 Class B, C-tick, FCC Class B, ICES, KCC, VCCI Class B
Environmental Complies with the appropriate requirements of ENERGY STAR® (ENERGY STAR qualified amplifier), EU code of conduct, RoHS, WEEE
Product warranty 3 years parts
Everlast power supply warranty 7 years parts and labor
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.
(082217-D24)
Shipping Dimensions and Weights
Part # 60-850-11
Height Width Depth 4.25" (10.8 cm) 14.0" (35.6 cm) 13.0" (33.0 cm)
Weight 4.38 lbs (1.99 kg)Extron SF26CT SoundField XD 6.5" Two-Way Ceiling Speaker with 8" Composite Back Can and 70/100 V Transformer
Audio/acoustic and electrical
Speaker type 2-way ceiling speaker with composite back can
Frequency range 65 Hz to 22 kHz, -10 dB, half space (per IEC 60268-5)
Frequency response 88 Hz to 22 kHz, +/−3dB, half space
Power capacity 65 W (rms) continuous pink noise
130 W (rms) continuous program
Rated maximum input voltage (MIV) 22.4 V (62.6 W at 8 ohms) (per AES2-2012)
Maximum SPL 104 dB, 1 m (based on MIV)
106 dB, 1 m (linear)
Nominal sensitivity 88 dB SPL, 1W, 1 m, half space
Nominal impedance 8 ohms per speaker
Crossover frequency 2.5 kHz
Nominal coverage angle 111° conical coverage (1 kHz to 4 kHz)
Drivers
Woofer (1) 6.5" (165 mm) polypropylene cone with moisture resistant coating
Tweeter (1) 0.75" (19.1 mm) PEI dome
Rotary switch taps 70 V: 64 W, 32 W, 16 W, 8 W, 8 ohms direct
100 V: null, 64 W, 32 W, 16 W, 8 ohms direct
Overload protection Full range power limiter with the 8 ohm direct input only, protecting the tweeter, woofer, and crossover
Input connector (1) 5 mm captive screw connector, 4 pole for 1 input and 1 loop-through
General
Package 2 speakers (1 pair)
Included accessories Cutout template/paint shield, setup guide, mounting screws, 4 V-rails, 2 C-rings, 2 round grilles, 2 cable clamps, 2 captive screw connectors
Temperature/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing
Mounting Ceiling mountable with included hardware
Enclosure type Plenum rated, fire-resistant (UL94V-0) composite back can/baffle;
Magnetically attached powder-coated steel grille with plastic bezel.
Enclosure outer dimensions 8.34" H x 10.64" diameter
(211.8 mm x 270.3 mm diameter)
8.0" H (203.2 mm H) from front of ceiling tile to back of rear enclosure
Cutout dimensions 9.3" diameter
(236.2 mm diameter)
Product weight 9.4 lbs (4.3 kg) each
Regulatory compliance
Safety CE, UL 2043, UL1480, NFPA 90A, NFPA 70
UL Listed for use in plenum airspaces:
UL 2043 listed for heat and smoke release,
UL 1480 listed for commercial and professional audio systems
Environmental RoHS, WEEE
Product warranty 3 years parts
NOTE All nominal levels are at ±10%.
NOTE Specifications are subject to change without notice.Shipping Dimensions and Weights
Part # 60-1310-03
Height Width Depth 14.0" (35.6 cm) 20.5" (52.1 cm) 13.5" (34.3 cm)
Weight 26.7 lbs (12.11 kg)
You may also like:
For export (= shipments outside of Singapore) we do not charge GST. In this case, please refer to the prices excl GST.
