COVID-19

COVID-19

WE'RE OPEN – SHOP ON-LINE!
Safe management procedures in place – visits to our premises suspended till further notice.

ART Zdirect DI Box

was: S$ 64.00
now: S$ 49.99
(S$ 49.99 excl GST)
only 2 units left! Not refundable/exchangeable   Want this delivered today? Find out more
Want this item delivered to you today?*
  • Please call or WhatsApp us at +65 8388 9888 to confirm availability.(Mon–Fri 10:00–17:00)
  • Extra charges (incl GST):
    • S$ 20.00 for deliveries of 8kg or below.
    • S$ 30.00 for deliveries above 8kg.
  • Your order must be paid in full before 14:00 (2:00pm) today.

* Not on weekends and public holidays.

Key Features:
  • Single-channel passive direct box
  • A stylish and very compact durable aluminum chassis
  • Input Attenuator switches for a wide range of signal levels
  • Phase Invert switch on the box for quick phase corrections
  • An "input thru" jack that allows for tapping off of the signal chain
  • A ground lift switch which lets you totally separate the input and output signal grounds, to reduce hum and ground-loop noise
Show moreShow less
  • The Zdirect is a high quality totally passive interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input thru a high performance audio isolation transformer. The high impedance single-ended 1/4″ input is converted by the transformer into an isolated balanced low impedance signal source.

    The Zdirects audio transformer has an extremely flat and wide frequency response and can handle high signal levels while still maintaining an isolated balanced low impedance output. This gives the Zdirect a very clean and neutral sound with a wide variety of signal sources and over long signal runs in high noise environments.The Input Attenuator switches allow for a wide range of signal levels and the Input Thru jack allows for tapping off of your signal chain. The Ground Lift switch lets you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise.

    What further sets the Zdirect apart from other “DI” boxes are its extended features and versatility. We have added a switchable low pass Filter that cuts out all very high frequency interference. This Bessel filter on the output is placed out of the audio range and is primarily intended to reduce radio frequency interference before it gets into the main system. The filter is also very effective in reducing any digital computer noise artifacts when using the Zdirect as an interface between a computer based audio workstation and your monitors.

    The Phase Invert switch, while not normally included with your run of the mill D.I. box, has been added to allow you to switch signal polarity right at the source. This feature is especially handy when you are combining a direct tap with a microphone feed in the mix.The compact black anodized all aluminum case and it’s passive design allow the Zdirect to provide years of trouble free service in Live Sound, Permanent/Fixed Install, D.J., and virtually any PA application.

    It’s full feature set, rugged construction, and high-end specifications make the Zdirect the obvious choice.

  •  

    Frequency Response 10Hz -50kHz, +/-.5dB @ +4dBu
    Total Harmonic Distortion .01% Typical @ 1kHz, +18dBu, .05% @ 100Hz, +18dBu
    Input Connections ¼ – inch TRS unbalanced, 50k Ω
    Output Connections XLR male balanced, 600 Ω
    Output Phase Switchable, Normal/Invert
    Ground Lift Switchable, fully isolates inputs from chassis and output
    Input Attenuation Switchable, (0dB, -20dB, -40dB)
    Filter Type / Response Switchable, Low Pass, -3dB @30kHz
    Dimensions 1.75″H x 4.2″D x 3.5″W (44.5mm x 107mm x 89mm)
    Weight 0.75 lbs (0.35 kg)

For export (= shipments outside of Singapore) we do not charge GST. In this case, please refer to the prices excl GST.

Products
Brands
Products
Brands